Spare parts KIA K2500 Platform/Chassis (SD) 2.5 CRDi
Criteria
| Tightening Torque [Nm]: | 80 Nm |
| Diameter of large connecting rod big end [mm]: | 60 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 33 mm |
| Hole Spacing [mm]: | 111,5 mm |
| Processing: | cracked |
| Processing: | Forged |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | 3 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with piston rings |
| Compression Height [mm]: | 54,2 mm |
| Cylinder Bore [mm]: | 91,5 mm |
| Bolt Length [mm]: | 75 mm |
| Oversize [inch]: | 0,5 Inch |
Show all
Show less
| Stock: | 5 pcs |
| Stock: | 1 pcs |
Criteria
| Cylinder Bore [mm]: | 91 mm |
| Standard Size [STD]: | yes |
| Full Set: | yes |
Show all
Show less
| Stock: | 12 pcs |
Criteria
| Oversize [mm]: | 0,5 mm |
| Cylinder Bore [mm]: | 91,5 mm |
| Full Set: | yes |
Show all
Show less
| Stock: | 6 pcs |
| Stock: | > 25 pcs |
Criteria
| Length [mm]: | 110,5 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 28 mm |
| Material: | Chrome-Mangan-Nickel Steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Length [mm]: | 110,5 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 31,7 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Stock: | 15 pcs |