Spare parts VW SHARAN (7N1, 7N2) 2.0 TDI
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,63 mm |
| Notches/Holes Number: | 2 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 1 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,71 mm |
| Notches/Holes Number: | 3 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Fitting Position: | Front Fitting |
| Outer Diameter [mm]: | 136 mm |
| Inner Diameter [mm]: | 35 mm |
| Material: | PTFE (polytetrafluoroethylene) |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
| Length [mm]: | 99,3 mm |
| Valve Stem Diameter [mm]: | 6 mm |
| Valve Head Diameter [mm]: | 28,1 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Number of pins: | 2 -pin connector |
| Operating Mode: | Electric |
Criteria
| Number of pins: | 2 -pin connector |
| Operating Mode: | Electric |
Criteria
| Voltage [V]: | 12 V |
| Supplementary Article/Supplementary Info: | with pipe socket |
| Operating Mode: | Electric |
| Valve Type: | Control Valve |
Show all
Show less
Criteria
| Glow Plug Design: | after-glow capable |
| Voltage [V]: | 4,4 V |
| Fitting Depth [mm]: | 28 mm |
| Thread Size: | M10x1,0 |
| Cone Pitch: | 63 |
| Tightening torque from [Nm]: | 15 Nm |
| Tightening torque to [Nm]: | 20 Nm |
| Failure Moment [Nm]: | 35 Nm |
| Supplementary Article/Supplementary Info 2: | with pressure sensor |
| Number of Parts [parts]: | 4 -part |
| General Information: | includes components BORGWARNER |
Show all
Show less
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Production date from: | 2015 |
| Supplementary Article/Supplementary Info 2: | with camshaft(s) |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
Criteria
| Model Year from: | 2014 |
| Pump Type: | Tandem Pump |
| Operating Mode: | mechanical |
Show all
Show less
Criteria
| Model Year from: | 2014 |
| Operating Mode: | mechanical |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| Production date from: | 2014 |
| Full Set: | yes |
Show all
Show less
Criteria
| Quantity: | 4 |
Criteria
| Number of blades/vanes: | 6 |
| Housing Type: | without housing |
| Number of Teeth: | 28 |
Show all
Show less
Criteria
| Water pump impeller material: | Plastic |
| Housing Type: | without housing |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| For OE number: | 03L 103 469 AD |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,55 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
Criteria
| Recess Depth 1 [mm]: | 13,12 mm |
| Oversize [mm]: | 0,25 mm |
| Compression Height [mm]: | 45,8 mm |
| Cylinder Bore [mm]: | 81,25 mm |
| Recess Diameter [mm]: | 50,88 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less