Spare parts VW PASSAT ALLTRACK B8 Variant (3G5, CB5) 2.0 TDI 4motion
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Voltage [V]: | 12 V |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Supplementary Article/Supplementary Info 2: | Low-pressure Side |
| Cooling Type: | water-cooled |
| Operating Mode: | Electric |
| Scope of Supply: | includes components ET Engineteam + Pierburg |
Show all
Show less
Criteria
| Glow Plug Design: | after-glow capable |
| Voltage [V]: | 4,4 V |
| Fitting Depth [mm]: | 28 mm |
| Thread Size: | M10x1,0 |
| Cone Pitch: | 63 |
| Tightening torque from [Nm]: | 15 Nm |
| Tightening torque to [Nm]: | 20 Nm |
| Failure Moment [Nm]: | 35 Nm |
| Supplementary Article/Supplementary Info 2: | with pressure sensor |
| Number of Parts [parts]: | 4 -part |
| General Information: | includes components BORGWARNER |
Show all
Show less
Criteria
| Core Length [mm]: | 200 mm |
| Core Width [mm]: | 130 mm |
| Core Depth [mm]: | 82 mm |
| Cooling Type: | water-cooled |
Show all
Show less
Criteria
| Model Year from: | 2014 |
| Pump Type: | Tandem Pump |
| Operating Mode: | mechanical |
Show all
Show less
Criteria
| Model Year from: | 2014 |
| Operating Mode: | mechanical |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| Production date from: | 2014 |
| Full Set: | yes |
Show all
Show less
Criteria
| Water pump impeller material: | Plastic |
| Housing Type: | without housing |
Criteria
| Engine Timing: | Timing Belt |
| Supplementary Article/Supplementary Info 2: | for crankshaft |
| Number of Teeth: | 22 |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| For OE number: | 03L 103 469 AD |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,55 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
Criteria
| Recess Depth 1 [mm]: | 13,12 mm |
| Oversize [mm]: | 0,25 mm |
| Compression Height [mm]: | 45,8 mm |
| Cylinder Bore [mm]: | 81,25 mm |
| Recess Diameter [mm]: | 50,88 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less