Spare parts VW TIGUAN (AD1, AX1) 1.6 TDI
Criteria
| Core Length [mm]: | 200 mm |
| Core Width [mm]: | 130 mm |
| Core Depth [mm]: | 82 mm |
| Cooling Type: | water-cooled |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Production date from: | 2015 |
| Supplementary Article/Supplementary Info 2: | with camshaft(s) |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info 2: | with gear |
| Pump Type: | Tandem Pump |
| Number of Teeth: | 29 |
| Operating Mode: | mechanical |
Show all
Show less
| Stock: | 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| General Information: | includes components ET Engineteam + Continental |
Show all
Show less
| Stock: | 6 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| Full Set: | yes |
Show all
Show less
| Stock: | 6 pcs |
| Stock: | > 25 pcs |
Criteria
| Water pump impeller material: | Metal |
| Housing Type: | without housing |
| Stock: | 1 pcs |
Criteria
| Cylinder Bore [mm]: | 79,5 mm |
| Component Number: | 1.1,75 2.2,00 3.2,00 |
| Standard Size [STD]: | yes |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Cylinder Bore [mm]: | 79 mm |
| Component Number: | 1.1,75 2.2,00 3.2,00 |
| Standard Size [STD]: | yes |
| Full Set: | yes |
Show all
Show less
| Stock: | 15 pcs |
Criteria
| Oversize [mm]: | 0,5 mm |
| Cylinder Bore [mm]: | 80 mm |
| Stock: | > 25 pcs |