Spare parts VW SHARAN (7N1, 7N2) 2.0 TDI 4motion
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| Full Set: | yes |
Show all
Show less
| Stock: | 6 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Material: | Plastic |
| For OE number: | 04L109283C |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,63 mm |
| Notches/Holes Number: | 2 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 1 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,71 mm |
| Notches/Holes Number: | 3 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Fitting Position: | Front Fitting |
| Outer Diameter [mm]: | 136 mm |
| Inner Diameter [mm]: | 35 mm |
| Material: | PTFE (polytetrafluoroethylene) |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Voltage [V]: | 12 V |
| Supplementary Article/Supplementary Info: | with pipe socket |
| Operating Mode: | Electric |
| Valve Type: | Control Valve |
Show all
Show less
Criteria
| Glow Plug Design: | after-glow capable |
| Voltage [V]: | 4,4 V |
| Fitting Depth [mm]: | 28 mm |
| Thread Size: | M10x1,0 |
| Cone Pitch: | 63 |
| Tightening torque from [Nm]: | 15 Nm |
| Tightening torque to [Nm]: | 20 Nm |
| Failure Moment [Nm]: | 35 Nm |
| Supplementary Article/Supplementary Info 2: | with pressure sensor |
| Number of Parts [parts]: | 4 -part |
| General Information: | includes components BORGWARNER |
Show all
Show less
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Production date from: | 2015 |
| Supplementary Article/Supplementary Info 2: | with camshaft(s) |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less