Spare parts VW T-CROSS (C11, D31) 1.6 TDi
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with gear |
| Supplementary Article/Supplementary Info: | with air intake pipe |
| Engine Timing: | Timing belt in the oil bath |
| Number of Teeth: | 29 |
| Number of Teeth: | 53 |
| Full Set: | yes |
Show all
Show less
| Stock: | 6 pcs |
Criteria
| Cylinder Bore [mm]: | 79,5 mm |
| Component Number: | 1.1,75 2.2,00 3.2,00 |
| Standard Size [STD]: | yes |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Cylinder Bore [mm]: | 79 mm |
| Component Number: | 1.1,75 2.2,00 3.2,00 |
| Standard Size [STD]: | yes |
| Full Set: | yes |
Show all
Show less
| Stock: | 15 pcs |
Criteria
| Oversize [mm]: | 0,5 mm |
| Cylinder Bore [mm]: | 80 mm |
| Stock: | > 25 pcs |
Criteria
| Oversize [mm]: | 0,5 mm |
| Cylinder Bore [mm]: | 80 mm |
| Full Set: | yes |
Show all
Show less
| Stock: | 11 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Material: | Plastic |
| For OE number: | 04L109283C |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 80,5 mm |
| Thickness [mm]: | 1,55 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Fitting Position: | Front Fitting |
| Outer Diameter [mm]: | 136 mm |
| Inner Diameter [mm]: | 35 mm |
| Material: | PTFE (polytetrafluoroethylene) |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Valve Type: | for inlet valves |
| Valve Type: | for exhaust valves |
| Length [mm]: | 36 mm |
| Outer Diameter [mm]: | 10,06 mm |
| Inner Diameter [mm]: | 5,98 mm |
| Material: | Bronze |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |