Spare parts VW POLO IV (9N_, 9A_) 1.8 GTI
Criteria
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Thread Size: | M14x1,5 |
| Bolt Head-/Nut Design: | External Hexagon |
| Length [mm]: | 22 mm |
| Spanner Size: | 19 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Crankcase |
| Valve Type: | Breather Valve |
| Stock: | > 25 pcs |
Criteria
| Quantity Unit: | Pair |
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Quantity: | 10 |
| Quantity Unit: | Set |
| Standard Size [STD]: | yes |
Show all
Show less
| Stock: | 24 pcs |
Criteria
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 20 mm |
| Hole Spacing [mm]: | 108,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Parallel Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 108,7 mm |
| Connecting Rod Design: | Parallel Connecting Rod |
| Weight [g]: | 560 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 20 mm |
Show all
Show less
| Stock: | 7 pcs |
| Stock: | 7 pcs |
Criteria
| Driven Units: | Camshaft |
| Number of chain links: | 50 |
| Chain Type: | Closed chain |
| Chain Type: | Simplex |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Number of pins: | 2 -pin connector |
| Operating Mode: | Electric-hydraulic |
| Stock: | 22 pcs |
Criteria
| Diameter [mm]: | 82,50 mm |
| Thickness [mm]: | 1,22 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | 25 pcs |
Criteria
| Fitting Position: | Front |
| Outer Diameter [mm]: | 47 mm |
| Inner Diameter [mm]: | 32 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Right-hand Twist |
| Dust Cover: | with dust lip |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | frontal sided |
| Outer Diameter [mm]: | 48 mm |
| Inner Diameter [mm]: | 35 mm |
| Material: | PTFE (polytetrafluoroethylene) |
| Swirl Type: | Right-hand Twist |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Valve Type: | for inlet valves |
| Valve Type: | for exhaust valves |
| Length [mm]: | 39 mm |
| Outer Diameter [mm]: | 11,06 mm |
| Inner Diameter [mm]: | 6 mm |
Show all
Show less
| Stock: | > 25 pcs |
General information
| Code: | VP0003 |
| Title: | Valve keeper |
| Car: | VW Škoda Audi Citroen Peugeot Nissan Volvo Amarok Arteon Bora Caddy Touareg Fabia Octavia Superb Yeti A3 Sportback A4 A6 C4 C8 Jumper Jumpy Spacetourer Boxer 3008 308 407 5008 Qasgqai NV400 Kubistar C30 S60 S80 V90 XC60 2.0TDI 2.0TSI 1.8T 2000+ |
| Weight: | 0,20 kg |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Outer Diameter [mm]: | 8,4 mm |
| Notches/Holes Number: | 3 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Operating Mode: | hydraulic |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
| Stock: | > 25 pcs |
Criteria
| Number of grooves: | 6 |
| Width [mm]: | 30 mm |
| Outer Diameter [mm]: | 139 mm |
Show all
Show less