Spare parts AUDI A6 C7 (4G2, 4GC) 2.0 TDI 100 kW
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Glow Plug Design: | after-glow capable |
| Voltage [V]: | 4,4 V |
| Fitting Depth [mm]: | 28 mm |
| Thread Size: | M10x1,0 |
| Cone Pitch: | 63 |
| Tightening torque from [Nm]: | 15 Nm |
| Tightening torque to [Nm]: | 20 Nm |
| Failure Moment [Nm]: | 35 Nm |
| Supplementary Article/Supplementary Info 2: | with pressure sensor |
| Number of Parts [parts]: | 4 -part |
| General Information: | includes components BORGWARNER |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info 2: | with filter |
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Production date from: | 2015 |
| Supplementary Article/Supplementary Info 2: | with camshaft(s) |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
Criteria
| Recess Depth 1 [mm]: | 13,1 mm |
| Oversize [mm]: | 0,5 mm |
| Compression Height [mm]: | 45,55 mm |
| Cylinder Bore [mm]: | 81,51 mm |
| For pin diameter [mm]: | 26 mm |
| Recess Diameter [mm]: | 50,88 mm |
| Bolt Length [mm]: | 66 mm |
Show all
Show less
Criteria
| Quantity: | 4 |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| For OE number: | 03L 103 469 AD |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 82,3 mm |
| Thickness [mm]: | 1,55 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less