Spare parts OPEL INSIGNIA A Sports Tourer (G09) 2.0 CDTI 4x4 (35)
Criteria
| Thread Size: | M7x1 |
| Bolt Head-/Nut Design: | Torx |
| Stock: | > 25 pcs |
Criteria
| Thread Size: | M7x1 |
| Bolt Head-/Nut Design: | Torx |
| Quantity: | 8 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Number of pins: | 4 -pin connector |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Rear Axle |
| Clutch ID: | HALDEX GEN IV |
| Filter type: | Filter Insert |
| Supplementary Article/Supplementary Info: | with gaskets/seals |
Show all
Show less
| Stock: | > 25 pcs |
| Stock: | 20 pcs |
Criteria
| Number of Parts [parts]: | 5 -part |
| Stock: | > 25 pcs |
Criteria
| Quantity Unit: | Set |
| Standard Size [STD]: | yes |
| Stock: | 7 pcs |
Criteria
| Oversize [mm]: | 0,25 mm |
| Quantity Unit: | Set |
| Stock: | 3 pcs |
Criteria
| Tightening Torque [Nm]: | 70 Nm |
| Diameter of large connecting rod big end [mm]: | 53,9 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 30 mm |
| Hole Spacing [mm]: | 103 mm |
| Processing: | cracked |
| Processing: | Forged |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 70 Nm |
| Standard Set: | yes |
| Weight [g]: | 740 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 30 mm |
Show all
Show less
| Stock: | 18 pcs |
| Stock: | 2 pcs |
Criteria
| Operating Mode: | mechanical |
| Stock: | 20 pcs |
Criteria
| Units/Pulleys: | incl. tensioner pulley |
| Units/Pulleys: | incl. guide pulley |
| Width [mm]: | 24 mm |
| Version: | Michelin + ET |
| Number of Teeth: | 199 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Units/Pulleys: | incl. tensioner pulley |
| Units/Pulleys: | incl. guide pulley |
| Width [mm]: | 24 mm |
| Version: | Michelin + ET |
| Number of Teeth: | 199 |
| Operating Mode: | mechanical |
Show all
Show less
| Stock: | 20 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with belt |
| Supplementary Article/Supplementary Info 2: | with tensioner element |
| Units/Pulleys: | incl. tensioner pulley |
| Units/Pulleys: | incl. guide pulley |
| Width [mm]: | 24 mm |
| Version: | Michelin + ET |
| Number of Teeth: | 199 |
| Operating Mode: | mechanical |
Show all
Show less
| Stock: | 20 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 95,7 mm |
| Valve Stem Diameter [mm]: | 6 mm |
| Valve Head Diameter [mm]: | 24,4 mm |
| Material: | Chrome-Mangan-Nickel Steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | 9 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 95,7 mm |
| Valve Stem Diameter [mm]: | 6 mm |
| Valve Head Diameter [mm]: | 28,5 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | 18 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Material: | Cast Iron |
Criteria
| Fitting Position: | Exhaust Side |
| Material: | Cast Iron |
Criteria
| Oversize [mm]: | 0,5 mm |
| Quantity Unit: | Set |