Spare parts VW SHARAN (7N1, 7N2) 2.0 TDI
Criteria
| Voltage [V]: | 12 V |
| Number of pins: | 5 -pin connector |
| Operating Mode: | Electric |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Oxygen Sensor: | Heated |
| Stock: | 4 pcs |
General information
| Code: | HE0006 |
| Title: | Oil Cooler, engine oil |
| Car: | Audi A1/A3/A4/A5/A6/Q3/Q5/TT Seat Alhambra Altea Ibiza Toledo Leon Exeo Škoda-VW Octavia-II Fabia-II Rapid Superb-II Yeti Volkswagen Ameo Amarok Caddy Golf Polo Passat Crafter Transporter CAAA CAAB CAAC CFFA CFFB CFGB CFGC CFHB CFHD 2007+ |
| Weight: | 0,46 kg |
| Stock: | 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | without camshaft(s) |
| Supplementary Article/Supplementary Info 2: | without valves |
| Supplementary Article/Supplementary Info 2: | without valve springs |
Show all
Show less
| Stock: | 7 pcs |
Criteria
| Fitting Position: | Intake Side |
| Material: | Steel |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Material: | Steel |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Production date from: | 2015 |
| Supplementary Article/Supplementary Info 2: | with camshaft(s) |
| General Information: | Compatibility check via VIN code or visual inspection requir ed. In specific models, different camshaft modules are insta lled over time, therefore precise identification according t o the specific vehicle is required. |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Stock: | > 25 pcs |
General information
| Code: | OM0030 |
| Title: | Connecting Rod |
| Car: | Audi A1/A3/Q3/TT Seat Altea Alhambra Leon Toledo Škoda-VW Octavia-II Superb-II Yeti Volkswagen Amarok Caddy Passat Crafter Multivan Transporter AZV BKD BMP BMM BPZ BSS BSV BWW CBBB CBDB CEGA CFFB CFGB CFHA CFHC CFHF CFJA 2,0TDI 2,5TDI 2003+ |
| Weight: | 0,76 kg |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 53,7 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 26 mm |
| Hole Spacing [mm]: | 104,1 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |