Spare parts PORSCHE MACAN (95B)
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Voltage [V]: | 12 V |
| Number of pins: | 2 -pin connector |
| Operating Mode: | Electric |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with integrated air temperature sensor |
| Number of pins: | 4 -pin connector |
| Stock: | 20 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info: | with oil filter |
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Diameter of large connecting rod big end [mm]: | 63,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 30 mm |
| Hole Spacing [mm]: | 113,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 113,7 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Weight [g]: | 715 g |
| Number of Parts [parts]: | 6 -part |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 30 mm |
Show all
Show less
| Stock: | 25 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Diameter of large connecting rod big end [mm]: | 58,8 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 22 mm |
| Hole Spacing [mm]: | 112,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | 11 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Hole Spacing [mm]: | 112,7 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Quantity: | 6 |
| Supplementary Article/Supplementary Info: | with protective gloves |
| Weight [g]: | 580 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 22 mm |
Show all
Show less
| Stock: | 1 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info 2: | with thermostat |
| Supplementary Article/Supplementary Info 2: | with belt |
| Water pump impeller material: | Plastic |
| Operating Mode: | mechanical |
Show all
Show less
| Stock: | 20 pcs |
Criteria
| Fitting Position: | for cylinder 1-3 |
| Fitting Position: | Right |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Fitting Position: | for cylinder 4-6 |
| Fitting Position: | Left |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
| Stock: | 7 pcs |