Spare parts IVECO DAILY VI Van
Criteria
| For manufacturer emissions standard: | EUR4 |
| Thickness [mm]: | 1,20 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Emissions Standard: | Euro 4 (D4) |
| Thickness [mm]: | 1,30 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,10 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,10 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,20 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,20 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,30 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | 19 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 88,50 mm |
| Thickness [mm]: | 1,30 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | 19 pcs |
Criteria
| Fitting Position: | frontal sided |
| Outer Diameter [mm]: | 80 mm |
| Inner Diameter [mm]: | 50 mm |
| Material: | FVMQ [fluorosilicone rubber) |
| Article number of the recommended special tool: | IVECO 99346254 |
| Radial Shaft Seal Design: | SP |
| Swirl Type: | Right-hand Twist |
Show all
Show less
| Stock: | 22 pcs |
Criteria
| Material: | ACM (Polyacrylate) |
| Stock: | > 25 pcs |
| Stock: | > 25 pcs |
| Stock: | 19 pcs |
General information
| Code: | VP0003 |
| Title: | Valve keeper |
| Car: | VW Škoda Audi Citroen Peugeot Nissan Volvo Amarok Arteon Bora Caddy Touareg Fabia Octavia Superb Yeti A3 Sportback A4 A6 C4 C8 Jumper Jumpy Spacetourer Boxer 3008 308 407 5008 Qasgqai NV400 Kubistar C30 S60 S80 V90 XC60 2.0TDI 2.0TSI 1.8T 2000+ |
| Weight: | 0,20 kg |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Outer Diameter [mm]: | 8,4 mm |
| Notches/Holes Number: | 3 |
Show all
Show less
| Stock: | > 25 pcs |
| Stock: | > 25 pcs |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with cable |
| Scope of Supply: | includes components ET Engineteam + Pierburg |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Model Year from: | 2011 |
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Fuel Mixture Formation: | Common Rail (CR) |
| Fuel Type: | Diesel |
| Number of pins: | 2 -pin connector |
| Version: | W/ Injector puller |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Fuel Mixture Formation: | Common Rail (CR) |
| Quantity: | 4 |
| Fuel Type: | Diesel |
| Number of pins: | 2 -pin connector |
| Version: | W/ Injector puller |
Show all
Show less
Criteria
| Emissions Standard: | Euro 6 |
| For OE number: | 61-2074-00 |
| For OE number: | 60-2024-00 |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with bearings |
Criteria
| Supplementary Article/Supplementary Info 2: | without camshaft(s) |
| Supplementary Article/Supplementary Info 2: | without valves |
| Supplementary Article/Supplementary Info 2: | without valve springs |
| For OE number: | 504278047 |
| Fuel Mixture Formation: | Petrol Injection |
Show all
Show less
Criteria
| Oversize [mm]: | 0,25 mm |
| Quantity Unit: | Set |
Criteria
| Oversize [mm]: | 0,25 mm |