Spare parts RENAULT LAGUNA I (B56_, 556_)
Criteria
| Oversize [mm]: | 0,5 mm |
Criteria
| Tightening Torque [Nm]: | 60 Nm |
| Diameter of large connecting rod big end [mm]: | 51,585 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 28,025 mm |
| Length [mm]: | 139 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
Criteria
| Cylinder Bore [mm]: | 82,7 mm |
| Standard Size [STD]: | yes |
Criteria
| Fitting Position: | Exhaust Side |
| Fitting Position: | Intake Side |
| Outer Diameter [mm]: | 119 mm |
| Number of Teeth: | 38 |
| Engine Timing: | Timing Belt |
| Inner Diameter [mm]: | 12 mm |
| Width [mm]: | 32 mm |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 80,50 mm |
| For OE number: | 151.890 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| General Information: | contains Elring parts |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 103,2 mm |
| Valve Stem Diameter [mm]: | 7 mm |
| Valve Head Diameter [mm]: | 27 mm |
| Material: | Chrome-Mangan-Nickel Steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
Criteria
| Length [mm]: | 107 mm |
| Valve Stem Diameter [mm]: | 8 mm |
| Valve Head Diameter [mm]: | 40,2 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
Criteria
| Length [mm]: | 115,6 mm |
| Valve Stem Diameter [mm]: | 8 mm |
| Valve Head Diameter [mm]: | 40,1 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Height 1 [mm]: | 7,550 mm |
Show all
Show less