Spare parts AUDI A4 Allroad B9 (8WH, 8WJ)
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info: | with mounting tool |
| Full Set: | yes |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Glow Plug Design: | after-glow capable |
| Voltage [V]: | 4,4 V |
| Fitting Depth [mm]: | 28 mm |
| Thread Size: | M10x1,0 |
| Cone Pitch: | 63 |
| Tightening torque from [Nm]: | 15 Nm |
| Tightening torque to [Nm]: | 20 Nm |
| Failure Moment [Nm]: | 35 Nm |
| Supplementary Article/Supplementary Info 2: | with pressure sensor |
| Number of Parts [parts]: | 4 -part |
| General Information: | includes components BORGWARNER |
Show all
Show less
Criteria
| Oversize [mm]: | 0,75 mm |
| Quantity Unit: | Set |
Criteria
| Width [mm]: | 0,75 mm |
| Quantity Unit: | Set |
Criteria
| Water pump impeller material: | Plastic |
| Housing Type: | without housing |
Criteria
| Oversize [mm]: | 0,5 mm |
| Cylinder Bore [mm]: | 83,01 mm |
| Only for article number: | 800113810050 |
| Full Set: | yes |
| General Information: | Includes components from Kolbenschmidt + Elring |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| For OE number: | 03L 103 469 AD |
Criteria
| Thickness [mm]: | 0,90 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Thickness [mm]: | 0,90 mm |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| General Information: | includes components ET Engineteam + Elring |
Show all
Show less