Spare parts AUDI Q7 Van (4LB)
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Diameter of large connecting rod big end [mm]: | 58,8 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 22 mm |
| Hole Spacing [mm]: | 112,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | 11 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Hole Spacing [mm]: | 112,7 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Quantity: | 6 |
| Supplementary Article/Supplementary Info: | with protective gloves |
| Weight [g]: | 580 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 22 mm |
Show all
Show less
| Stock: | 1 pcs |
Criteria
| Cylinder Bore [mm]: | 83 mm |
| Stock: | > 25 pcs |
Criteria
| Cylinder Bore [mm]: | 83 mm |
| Standard Size [STD]: | yes |
| Full Set: | yes |
Show all
Show less
| Stock: | 9 pcs |
Criteria
| Cylinder Bore [mm]: | 84,5 mm |
| Component Number: | 1,2-1,5-2,0 |
| Standard Size [STD]: | yes |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Cylinder Bore [mm]: | 83 mm |
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info 2: | with bolts |
| Stock: | 22 pcs |
Criteria
| Fitting Position: | for cylinder 1-3 |
| Fitting Position: | Right |
| Supplementary Article/Supplementary Info: | with gasket/seal |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Fitting Position: | frontal sided |
| Outer Diameter [mm]: | 47 mm |
| Inner Diameter [mm]: | 32 mm |
| Material: | FPM (fluoride rubber)/ACM (polyacrylate rubber) |
| Radial Shaft Seal Design: | ASW |
| Swirl Type: | Alternating Twist |
| Dust Cover: | with dust lip |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with shaft seal |
| Stock: | > 25 pcs |