Spare parts SEAT TOLEDO III (5P2)
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Hole Spacing [mm]: | 104,1 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Standard Set: | yes |
| Quantity: | 4 |
| Weight [g]: | 670 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 26 mm |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 23 mm |
| Hole Spacing [mm]: | 111,2 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 111,2 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Number of Parts [parts]: | 4 -part |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 23 mm |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 111,2 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Number of Parts [parts]: | 4 -part |
| Processing: | Forged |
| Processing: | cracked |
| Component Number: | 4x50009180 |
| Pin Diameter [mm]: | 23 mm |
| General Information: | includes Kolbenschmidt components |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 21 mm |
| Hole Spacing [mm]: | 112,2 mm |
| Processing: | cracked |
| Processing: | Forged |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 112,2 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Quantity: | 4 |
| Weight [g]: | 520 g |
| Processing: | cracked |
| Processing: | Forged |
| Pin Diameter [mm]: | 21 mm |
Show all
Show less
| Stock: | 8 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 19 mm |
| Hole Spacing [mm]: | 109,2 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Parallel Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Hole Spacing [mm]: | 109,2 mm |
| Connecting Rod Design: | Parallel Connecting Rod |
| Standard Set: | yes |
| Weight [g]: | 514 g |
| Number of Parts [parts]: | 4 -part |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 19 mm |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 17 mm |
| Processing: | cracked |
| Connecting Rod Design: | Parallel Connecting Rod |
Show all
Show less
| Stock: | 2 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Number of connectors: | 3 |
| Operating Mode: | mechanical |
Show all
Show less
| Stock: | > 25 pcs |