Spare parts ALFA ROMEO GIULIETTA (940_)
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
| Supplementary Article/Supplementary Info 2: | Stellite covered valve seat |
| Length [mm]: | 95,2 mm |
| Valve Stem Diameter [mm]: | 6 mm |
| Valve Head Diameter [mm]: | 26,8 mm |
| Material: | Chrome-silicon-steel |
| Fuel Type: | LPG |
| Valve seat angle [°]: | 30 ° |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Chromed valve stem |
| Length [mm]: | 114,4 mm |
| Valve Head Diameter [mm]: | 26,6 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | > 25 pcs |
General information
| Code: | VP0003 |
| Title: | Valve keeper |
| Car: | VW Škoda Audi Citroen Peugeot Nissan Volvo Amarok Arteon Bora Caddy Touareg Fabia Octavia Superb Yeti A3 Sportback A4 A6 C4 C8 Jumper Jumpy Spacetourer Boxer 3008 308 407 5008 Qasgqai NV400 Kubistar C30 S60 S80 V90 XC60 2.0TDI 2.0TSI 1.8T 2000+ |
| Weight: | 0,20 kg |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Outer Diameter [mm]: | 8,4 mm |
| Notches/Holes Number: | 3 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Voltage [V]: | 14 V |
| Alternator Charging Current [A]: | 120 A |
| Pulleys: | with freewheel belt pulley |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info 2: | with valves |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head gasket |
| Supplementary Article/Supplementary Info 2: | with valves |
| Supplementary Article/Supplementary Info 2: | with bolts |
| General Information: | includes components ET Engineteam + Elring |
Show all
Show less
Criteria
| Tightening Torque [Nm]: | 60 Nm |
| Diameter of large connecting rod big end [mm]: | 51,36 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 26 mm |
| Hole Spacing [mm]: | 95,81 mm |
| Processing: | cracked |
| Processing: | Forged |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
Criteria
| Number of grooves: | 6 |
| Outer Diameter [mm]: | 165 mm |
| Inner Diameter [mm]: | 30 mm |
Show all
Show less