Spare parts FORD FOCUS IV (HN) 2.0 ST EcoBlue
Criteria
| Thread Size: | M12x1,5x160 |
| Number of bolts/screws: | 10 |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Fuel Type: | Diesel |
| Number of pins: | 2 -pin connector |
| Installation Information: | The control unit must be updated. |
Show all
Show less
| Stock: | 4 pcs |
Criteria
| Emission Standard: | Euro 6 |
| Recess Depth 1 [mm]: | 14,15 mm |
| Cylinder Bore [mm]: | 84,01 mm |
| Bolt Head Diameter [mm]: | 30 mm |
| Recess Diameter [mm]: | 48,3 mm |
| Bolt Length [mm]: | 63,5 mm |
| Standard Size [STD]: | yes |
| Material: | Aluminium |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Quantity: | 4 |
| Component Number: | 4x PM012000 |
| Bolt Head Diameter [mm]: | 30 mm |
| Cylinder Bore [mm]: | 84,01 mm |
| Recess Depth 1 [mm]: | 14,15 mm |
| Standard Size [STD]: | yes |
| Bolt Length [mm]: | 63,5 mm |
| Emission Standard: | Euro 6 |
| Recess Diameter [mm]: | 48,3 mm |
Show all
Show less
| Stock: | 7 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with electrical oil pressure valve |
| Supplementary Article/Supplementary Info 2: | with gear |
| Version: | Vane Pump |
| Number of Teeth: | 19 |
Show all
Show less
| Stock: | 7 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with crankshaft seal |
| Production date from: | 20.05.2019 |
| Stock: | 13 pcs |
Criteria
| Width [mm]: | 91 mm |
| Inner Diameter 1 [mm]: | 8 mm |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Fuel Type: | Diesel |
| Number of pins: | 2 -pin connector |
| Version: | With injector puller |
| Installation Information: | The control unit must be updated. |
Show all
Show less
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Quantity: | 4 |
| Fuel Type: | Diesel |
| Number of pins: | 2 -pin connector |
| Version: | With injector puller |
| Installation Information: | The control unit must be updated. |
Show all
Show less
Criteria
| Working torque to [Nm]: | 250 Nm |
| Material: | Cast Steel |