Spare parts AUDI TT Roadster (8N9) 1.8 T
Criteria
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Thread Size: | M14x1,5 |
| Bolt Head-/Nut Design: | External Hexagon |
| Length [mm]: | 22 mm |
| Spanner Size: | 19 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Crankcase |
| Valve Type: | Breather Valve |
| Stock: | 9 pcs |
Criteria
| Fitting Position: | Cylinder Head |
| Operating Mode: | Pressure Controlled |
| Valve Type: | Breather Valve |
| Valve Type: | Diaphragm Valve |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Upper |
| Fitting Position: | Cylinder Head |
| Supplementary Article/Supplementary Info: | with pipe |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Quantity Unit: | Pair |
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Quantity: | 10 |
| Quantity Unit: | Set |
| Standard Size [STD]: | yes |
Show all
Show less
| Stock: | 19 pcs |
Criteria
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 50,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 20 mm |
| Hole Spacing [mm]: | 108,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Parallel Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Full Set: | yes |
| Hole Spacing [mm]: | 108,7 mm |
| Connecting Rod Design: | Parallel Connecting Rod |
| Weight [g]: | 560 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 20 mm |
Show all
Show less
| Stock: | 9 pcs |
Criteria
| Number of ribs: | 6 |
| Weight [kg]: | 0,42 kg |
| Inner Diameter [mm]: | 30 mm |
| Outer Diameter [mm]: | 115 mm |
Show all
Show less
| Stock: | 23 pcs |