Spare parts VW AMAROK (2HA, 2HB, S1B, S6B, S7A, S7B, AGD) 2.0 BiTDI
Criteria
| Supplementary Article/Supplementary Info 2: | with seal ring |
| Thread Size: | M14x1,5 |
| Bolt Head-/Nut Design: | External Hexagon |
| Length [mm]: | 22 mm |
| Spanner Size: | 19 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Thread Size: | M12x1,75x137 |
| Number of bolts/screws: | 10 |
| Stock: | > 25 pcs |
Criteria
| Voltage [V]: | 12 V |
| Operating Mode: | Electric |
| Stock: | > 25 pcs |
General information
| Code: | HE0006 |
| Title: | Oil Cooler, engine oil |
| Car: | Audi A1/A3/A4/A5/A6/Q3/Q5/TT Seat Alhambra Altea Ibiza Toledo Leon Exeo Škoda-VW Octavia-II Fabia-II Rapid Superb-II Yeti Volkswagen Ameo Amarok Caddy Golf Polo Passat Crafter Transporter CAAA CAAB CAAC CFFA CFFB CFGB CFGC CFHB CFHD 2007+ |
| Weight: | 0,46 kg |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with filter |
| Stock: | 2 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Material: | Steel |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Supplementary Article/Supplementary Info: | with cam follower |
| Material: | Steel |
Show all
Show less
| Stock: | > 25 pcs |
General information
| Code: | OM0030 |
| Title: | Connecting Rod |
| Car: | Audi A1/A3/Q3/TT Seat Altea Alhambra Leon Toledo Škoda-VW Octavia-II Superb-II Yeti Volkswagen Amarok Caddy Passat Crafter Multivan Transporter AZV BKD BMP BMM BPZ BSS BSV BWW CBBB CBDB CEGA CFFB CFGB CFHA CFHC CFHF CFJA 2,0TDI 2,5TDI 2003+ |
| Weight: | 0,76 kg |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Diameter of large connecting rod big end [mm]: | 53,7 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 26 mm |
| Hole Spacing [mm]: | 104,1 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 50 Nm |
| Hole Spacing [mm]: | 104,1 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Standard Set: | yes |
| Quantity: | 4 |
| Weight [g]: | 670 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 26 mm |
Show all
Show less
| Stock: | > 25 pcs |