Spare parts AUDI Q8 (4MN, 4MT)
Criteria
| Fitting Position: | Intake Side |
| Fitting Position: | Exhaust Side |
| Model Year from: | 2016 |
| Operating Mode: | hydraulic |
Show all
Show less
| Stock: | 6 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with integrated air temperature sensor |
| Number of pins: | 4 -pin connector |
| Stock: | 20 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| Supplementary Article/Supplementary Info: | with oil filter |
| Stock: | > 25 pcs |
| Stock: | 2 pcs |
Criteria
| Number of Parts [parts]: | 5 -part |
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Diameter of large connecting rod big end [mm]: | 58,8 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 22 mm |
| Hole Spacing [mm]: | 112,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | 11 pcs |
Criteria
| Tightening Torque [Nm]: | 45 Nm |
| Hole Spacing [mm]: | 112,7 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Quantity: | 6 |
| Supplementary Article/Supplementary Info: | with protective gloves |
| Weight [g]: | 580 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 22 mm |
Show all
Show less
| Stock: | 1 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with gear |
| Number of Teeth: | 22 |
| Stock: | 2 pcs |
Criteria
| Length [mm]: | 99,3 mm |
| Valve Stem Diameter [mm]: | 5,965 mm |
| Valve Head Diameter [mm]: | 25,5 mm |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Valve Type: | for inlet valves |
| Valve Type: | for exhaust valves |
| Length [mm]: | 36 mm |
| Outer Diameter [mm]: | 10,06 mm |
| Inner Diameter [mm]: | 5,98 mm |
| Material: | Bronze |
Show all
Show less
| Stock: | > 25 pcs |