Spare parts FORD AUSTRALIA H9FA
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Operating Mode: | Electric |
| Stock: | 16 pcs |
Criteria
| Standard Size [STD]: | yes |
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 80 Nm |
| Diameter of large connecting rod big end [mm]: | 56 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 32 mm |
| Hole Spacing [mm]: | 105,7 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Tightening Torque [Nm]: | 80 Nm |
| Hole Spacing [mm]: | 105,7 mm |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
| Standard Set: | yes |
| Weight [g]: | 950 g |
| Processing: | Forged |
| Processing: | cracked |
| Pin Diameter [mm]: | 32 mm |
Show all
Show less
| Stock: | 9 pcs |
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | with bolts |
| Scope of Supply: | includes components ET Engineteam + Elring |
| Stock: | > 25 pcs |
| Stock: | 2 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gasket/seal |
| General Information: | includes components ET Engineteam + Elring |
| Stock: | 2 pcs |
Criteria
| Diameter [mm]: | 91 mm |
| Thickness [mm]: | 1,10 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with cylinder head screw set |
| Diameter [mm]: | 91 mm |
| Thickness [mm]: | 1,10 mm |
| Notches/Holes Number: | 1 |
| Gasket/Seal Design: | Multilayer Steel (MLS) |
| Scope of Supply: | includes components ET Engineteam + Elring |
Show all
Show less
| Stock: | 1 pcs |