Spare parts BMW N20 B20 D
Criteria
| Thread Size: | 42 |
| Thread Size: | M9 |
| Length [mm]: | 56 mm |
| Quantity: | 2 |
| General Information: | ET Engineteam connecting rod bolts are not compatible with OE connecting rods. The bolts can only be used with ET Engineteam connecting rods, part numbers OM0036, OM0046, OM0060, OM0066 and OM0078. |
Show all
Show less
| Stock: | > 25 pcs |
General information
| Code: | LP008100 |
| Title: | Connecting Rod Bearing Shell Set |
| Car: | BMW 1 (E81) 116 i 1 (E87) 118 i 2 kupé (F22, F87) 228 i 3 Gran Turismo (F34) 328 i 3 kupé (E92) 320 i 4 kupé (F32, F82) 428 i X1 (E84) xDrive 28 i X5 (F15, F85) xDrive 40e Z4 Roadster (E89) sDrive 20 i N20 B20 A 2006+ |
| Weight: | 0,18 kg |
Criteria
| Quantity Unit: | Set |
| Standard Size [STD]: | yes |
| Stock: | 22 pcs |
General information
| Code: | LP008125 |
| Title: | Connecting Rod Bearing Shell Set |
| Car: | BMW 1 (E81) 116 i 1 (E87) 118 i 2 kupé (F22, F87) 228 i 3 Gran Turismo (F34) 328 i 3 kupé (E92) 320 i 4 kupé (F32, F82) 428 i X1 (E84) xDrive 28 i X5 (F15, F85) xDrive 40e Z4 Roadster (E89) sDrive 20 i N20 B20 A 2006+ |
| Weight: | 0,18 kg |
Criteria
| Oversize [mm]: | 0,25 mm |
| Quantity Unit: | Set |
| Stock: | 8 pcs |
Criteria
| Tightening Torque [Nm]: | 60 Nm |
| Diameter of large connecting rod big end [mm]: | 53,6 mm |
| Dia. of small connecting rod big end (with bushing) [mm]: | 22 mm |
| Hole Spacing [mm]: | 106,5 mm |
| Processing: | Forged |
| Processing: | cracked |
| Connecting Rod Design: | Trapezoidal Connecting Rod |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info: | with gaskets/seals |
| Supplementary Article/Supplementary Info 2: | with bolts |
| Stock: | 14 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Stellite covered valve seat |
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
| Length [mm]: | 112,8 mm |
| Valve Stem Diameter [mm]: | 6 mm |
| Valve Head Diameter [mm]: | 28 mm |
| Valve stem material: | Chrome-silicon-steel |
| Valve Seat Material: | Chrome-Mangan-Nickel Steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Supplementary Article/Supplementary Info 2: | Valve stem tip hardened |
| Length [mm]: | 105 mm |
| Valve Stem Diameter [mm]: | 5 mm |
| Valve Head Diameter [mm]: | 32 mm |
| Material: | Chrome-silicon-steel |
| Valve seat angle [°]: | 45 ° |
Show all
Show less
| Stock: | 20 pcs |
General information
| Code: | VP0003 |
| Title: | Valve keeper |
| Car: | VW Škoda Audi Citroen Peugeot Nissan Volvo Amarok Arteon Bora Caddy Touareg Fabia Octavia Superb Yeti A3 Sportback A4 A6 C4 C8 Jumper Jumpy Spacetourer Boxer 3008 308 407 5008 Qasgqai NV400 Kubistar C30 S60 S80 V90 XC60 2.0TDI 2.0TSI 1.8T 2000+ |
| Weight: | 0,20 kg |
Criteria
| Valve Stem Diameter [mm]: | 6 mm |
| Outer Diameter [mm]: | 8,4 mm |
| Notches/Holes Number: | 3 |
Show all
Show less
| Stock: | > 25 pcs |
Criteria
| Fitting Position: | Intake Side |
| Number of Teeth: | 38 |
| Stock: | 8 pcs |
Criteria
| Fitting Position: | Exhaust Side |
| Number of Teeth: | 38 |
| Stock: | 6 pcs |